Kings Supply Company
24 Holt Road, PO Box 302, Manchaug, Massachusetts 01526-0302 United States Tel: 1-888-852-5340
Fax: 1-877-455-4647
One-Eyed Huskie Standard Propane Valve Wrench #HUSKIE-1
One-Eyed Huskie Standard Valve Wrench
$ 36.95
This is the easiest, best fitting valve wrench on the market! This standard valve wrench is used to remove old propane valves when retrofitting tanks. It fits precisely over the old valve and allows you to easily remove the valve. Together with our #LR-1 26-inch leverage rod, its beefy design makes easy removal of any valve. Valves can be changed in less than 5 minutes. Although this wrench will fit both regular and OPD Valves, we strongly suggest you purchase our #HUSKIE-OPD to install OPD Valves. The cut on the OPD wrench is slightly tighter to snugly fit OPD valves and not cause indentations on the brass on the new OPD valves. Wrenches are dyed different colors to distinguish OPD from regular wrench. Both wrenches us the same #LR-1 Leverage Rod.
BEFORE YOU READ ANY FURTHER, PLEASE READ THIS!
Any work performed on propane tanks must be performed by qualified personel trained to recertify propane tanks. Check with your propane supplier for proper training or go to National Propane Gas Association.
Use With Tank Vise To Change Valves
Features:
Beefy Wrench Lasts a Lifetime
Precise Fit Will Not Damage Valves
Precision Cast
Simple Design
Machine Cut Jaws
Hardened Steel
Powder Coat Paint Finish
32.25mm (1.27 Inches) Jaw Opening
Specifications:
Separate Wrench For Both Regular and OPD Valves To Insure Precision Fit
ALASKA, HAWAII, CANADA, MEXICO and OFF-SHORE
DESTINATION Customers - Actual Shipping Charges Shall
Apply. Please Disregard Published Shipping Charges.
Massachusetts Customers: 5% Sales Tax Shall Be
Added To All Deliveries To Massachusetts Addresses.