This is the easiest, best fitting valve wrench on the market! This OPD (Overfill Prevention Device) valve wrench is used to install and remove OPD style valves when retrofitting tanks. It fits precisely on the OPD valve and allows you to easily install the OPD valve. Together with our #LR-1 26-inch leverage rod, its beefy design makes easy installation or removal of any OPD valve. Valves can be changed in less than 5 minutes. This wrench fits OPD Valves only. We strongly suggest you purchase our #HUSKIE-1 to remove standard valves. The cut on the OPD wrench is slightly tighter to snugly fit OPD valves and not cause indentations on the brass on the new OPD valves. Wrenches are dyed different colors to distiguish OPD from regular wrench. Both wrenches us the same #LR-1 Leverage Rod.
BEFORE YOU READ ANY FURTHER, PLEASE READ THIS!
Any work performed on propane tanks must be performed by qualified personel trained to recertify propane tanks. Check with your propane supplier for proper training or go to National Propane Gas Association.
We Carry Both Standard and OPD Valve Wrenches!
Features:
Beefy Wrench Lasts a Lifetime
Precise Fit Will Not Damage Valves
Precision Cast
Simple Design
Machine Cut Jaws
Hardened Steel
Powder Coat Paint Finish
29mm (1.142 Inches) Jaw Opening
Specifications:
Separate Wrench For Both Regular and OPD Valves To Insure Precision Fit
ALASKA, HAWAII, CANADA, MEXICO and OFF-SHORE
DESTINATION Customers - Actual Shipping Charges Shall
Apply. Please Disregard Published Shipping Charges.
Massachusetts Customers: 5% Sales Tax Shall Be
Added To All Deliveries To Massachusetts Addresses.